Issue Date: April 18, 1997
Revision Date: December 4, 2002

Vista Precision Solutions, Inc.
(originally listed as Vista Research, Inc.)

Model LT-100 Monthly Monitoring Method and Line Tightness Test Method Version 1.0 (Primary Method)

Line Leak Detection Method for Airport Hydrant and Field Constructed Systems

Certification Leak rate of 0.2 gph with PD = 97% and PFA < 3%.
Leak rate of 0.1 gph with PD = 97% and PFA = 3%.
The USEPA has not set a minimum detectable leak rate for large diameter pipeline systems (airport hydrant systems) at the time of this evaluation.
Leak Threshold 0.148 gph for leak rate of 0.2 gph.
0.06 gph for leak rate of 0.1 gph.
A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold.
Applicability Gasoline, diesel, aviation fuel, fuel oil #4.
Specification System tests fiberglass or steel piping.
Tests are conducted at operating pressure to a maximum of 200 psi.
Pipeline Capacity Maximum of 3,400 gallons.
Waiting Time None between delivery and testing.
None between dispensing and testing.
Test Period Maximum of 2 hours after setup and after pipeline is fully isolated.
Test data are acquired and recorded by a microprocessor.
Calculations are automatically performed by the microprocessor.
System Features System may be permanently installed on pipeline to perform monthly monitoring or line lightness testing, or may be transported and set up to perform line tightness testing.
A single 2-hour test is required consisting of a 1-hour monitoring period at operating pressure, and a 1-hour monitoring period at atmospheric pressure.
Preset threshold. Printed message and alarm activation if leak is declared.
Calibration System must be calibrated in accordance with manufacturer’s instructions during system setup.

 

Vista Precision Solutions, Inc.

Evaluator:  Ken Wilcox Associates

2350 Lindberg Loop

Tel:  (816) 443-2494

Richland, WA 99354

Date of Evaluation:  04/15/96

Tel: (509) 943-2484

 
 

 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.