PMP Corporation c

Issue Date: August 16, 2023

PMP Corporation

PMP Piping Sump Sensor 63228 and 63229 as evaluated
with the Veeder-Root TLS-350 (firmware version 336)

INTERSTITIAL DETECTOR (LIQUID-PHASE)

Detector:

Output Type:

qualitative

Sampling Frequency:

continuous

Operating principle:

float switch

Test Results:

Piping Sump Sensor 63228 & 63229	premium gasoline	diesel*	water	E10	E25	E85
Lower detection limit (in)	1.43	1.33	1.2	1.43	1.37	1.36
Precision (in)	0.01	0.01	0.01	0.02	0.01	0.01
Detection time (sec)	<1	<1	<1	<1	<1	<1

*Evaluations determined these sensors' responses to the liquids shown above. Biodiesel blends B6-B20 meeting ASTM D7467 and biodiesel B100 meeting ASTM D6751 would also produce an alarm if the lower detection limit is exceeded. Responses to these fuels were not determined but would be expected to be very similar to the diesel responses.

Comments:
These sensors were third party evaluated with a Veeder Root TLS-350 console (software version 11.02). The only difference between the 63228 and 63229 sensors is cable length. PMP Corporation claims that these sensors will work with these other consoles: the TLS-450, TLS-4 series, TLS-350 series, TLS-300 series, TLS-PC, ILS-350, Simplicity, Gilbarco EMC series, EMC Basic series, EMC-PC, Red Jacket ProMax and ProPlus.

PMP Corporation	Evaluator: Solutions Engineering Group
25 Security Drive	420 N. Main Street
Avon, CT 06001-0422	Montgomery, IL 60538-1367
Tel: (860) 677-9656	Tel: (630) 701-7703
Toll Free: (800) 243-6628	Date of Evaluation: 5/09/2023
E-mail: sales@pmp-corp.com
URL: www.pmp-corp.com

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations. For full details, please refer to our expanded "DISCLAIMER" page.