Issue Date: June 17, 2008
Revision Date: May 21, 2014

PermAlert

PAL-AT Models AT20C, AT30C, AT50C, AT75C, AT20K, AT30K, AT40K, AT80K
with PHLR-S/L and PHLR-P-S/L Hydrocarbon Probes

INTERSTITIAL DETECTOR (LIQUID-PHASE)

Detector:

Output type:

qualitative

Sampling frequency:

continuous

Operating principle:

product permeable, magnetic membrane switch

Test Results:

PHLR-S/L and PHLR-P-S/L Hydrocarbon Probes

unleaded gasoline

Response time (sec)

24

Recovery time (hour)

>16

Product activation height (mm)

2.0

Lower detection limit (mm)

3.9

Specificity Results (in addition to above):
Activated:  diesel, jet fuel.
Not activated: water.

Comments:
Sensors are reusable.
“PHLR-S/L” sensors are designed for operation in ambient pressure environments while
“PHLR-P-S/L” sensors are designed for operation in pressurized environments.

 

PermAlert Evaluator:  Trace Laboratories
6410 W. Howard St. Tel:  (847) 934-5300
Niles, IL 60714 Date of Evaluation:  02/23/07
Tel:  (847) 966-2235
Email: marketing@permalert.com
URL: www.permalert.com

 

 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.