Issue Date: August 13, 2019


FuelPrime IRC Version 2.4


Certification Leak rate of 0.2 gph with PD > 99.0 % and PFA < 0.1%
For both single and manifolded tank systems
Leak Threshold 0.1 gph
A tank system should not be declared tight if the test result indicates a loss or gain that equals or exceeds this threshold.
Applicability Gasoline, diesel.
Other liquids may be tested after consultation with the vendor  
Tank Capacity Maximum of 30,000 gallons for single tank.
Maximum of 50,000 gallons cumulative capacity for manifolded tank systems with no more than 5 tanks in system.
Throughput Maximum monthly throughput of 84,708 gallons for single tanks and 40,512 gallons for manifold systems.
Data Requirement Minimum of 30 days of product level and throughput data.
Comments Data sets evaluated were supplied by the evaluator.
52% data sets were form manifolded tank systems.
Of 45 data sets submitted for evaluation, 3 were analyzed with inclusive results.
Median throughput of tanks evaluated was between 16,872 and 18,897 gallons.
Leak rates of 0.1, 0.2 and 0.3 gph were used in evaluation.
Results of evaluation is acceptable for tanks using ATG or dipstick to collect data.



Evaluator: Ken Wilcox Associates

Wyczolkowskiego 113

Tel: (816) 443-2494

44-109 Gliwice, Poland

Dates of Evaluation: 12/18/2015

Phone: +48 32 775 40 00



 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.