Issue Date: March 11, 2011

Preferred Utilities Manufacturing Corporation

TG-EL-D4A Fuel Sentry Control Unit, PS-LDS Non-Discriminating Pump Set Leak Detector Switch

OUT-OF-TANK PRODUCT DETECTOR (LIQUID-PHASE)

Detector:

Output type

qualitative

Sampling frequency

continuous

Operating principle

reed switch/float

 

Test Results:

PS-LDS Pump Set Leak Detector Switch

(Sumps and Containments)

unleaded gasoline

diesel*

Water

Detection time (sec)

did not float

<5

 <5

Fall time (sec)

did not float

<5

 <1

Lower detection limit (in)

did not float

1.332

 1.187

 

Comments:
Control panel:  Six intrinsically safe sensor inputs can be used for level indication and/or leak detection.

Provides audible and visual alarms.

Sensor:  Primarily designed for use with diesel fuel and other distillates but can be used with other fluids - see manufacturer for specific limitations.

*This evaluation determined the sensors' responses to the liquids shown above.  Biodiesel blends B6-B20 meeting ASTM D7467 and biodiesel B100 meeting ASTM D6751 would also produce an alarm if the sensor threshold is exceeded.  Responses to these fuels were not determined, but would be expected to be very similar to the diesel responses.

Detects leakage into the base pan of a pump set.

All stainless steel.

 

Preferred Utilitites Manufacturing Corporation

Evaluator:  Ken Wilcox Associates

31-35 South Street

Tel:  (816) 443-2494

Danbury, CT 06810

Date of Evaluation:  06/17/10

Tel:  (203) 743-6741

 

E-Mail:  DCosgrove@preferred-mfg.com  
URL:  www.preferred-mfg.com  
 

 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.