Issue Date: March 11, 2011 Preferred Utilities Manufacturing Corporation TG-EL-D4A Fuel Sentry Control Unit, PLS-1 Non-Discriminating Sensor for Reservoirs OUT-OF-TANK PRODUCT DETECTOR (LIQUID-PHASE) Detector:
Test Results:
Comments: Provides audible and visual alarms. Sensor: Primarily designed for use with diesel fuel and other distillates but can be used with other fluids - see manufacturer for specific limitations. *This evaluation determined the sensors' responses to the liquids shown above. Biodiesel blends B6-B20 meeting ASTM D7467 and biodiesel B100 meeting ASTM D6751 would also produce an alarm if the sensor threshold is exceeded. Responses to these fuels were not determined, but would be expected to be very similar to the diesel responses. Provides up to six independent liquid level switches on one sealed probe up to 72 inches length. May be used with any clean, low viscosity, non adhering fluid compatible with brass, solder, epoxy and Buna-N. Used on fuel oil day tanks to control the addition of oil from remote pumps and alarm at high and low levels. Can also be used for detection of leaks into sumps or other containment vessels used to collect liquids containment pipeline leaks or other types of sump.
|
| Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary | Appearance on
this list is not to be construed as an endorsement by any regulatory agency nor
is it any guarantee of the performance of the method or equipment. |